Over 16,530,313 people are on fubar.
What are you waiting for?
Tuscany Electronic Dreams began distribution of new Digital Q6400AC multiple Chargers manufactured by EV PEAK. This device has 4 outputs with 100 W per channel and reload all types of batteries for model LiPo/LiFe/LiIon/NiMh/NiCd/Pb. The usage is very simple and the Q6400AC(quadcopter frame) is able to monitor and balance each cell individually Pack (tolerance +-0.01 V). Using software installed on YOUR PC you can monitor charging of parcels via a USB connection.
Among the many functions of this charger is the "cycle" mode to make the refresh of NiMh NiCd battery packs, which allows the upload/download up to 6 times.
Technical specifications of the Charger Digital multiple Q6400AC EV PEAK:
Traxxas continues to churn out new (or rather to renew its line of new bodywork and frames with innovative ideas). The latest addition is the Skully: a moster truck based on the chassis of the Stampede with a "skeletal" body designed for fun RC(hobby shop). In addition to body decidedly out of the ordinary (available in both blue green) this model, powered by an engine Titan 550 12 Turn (with ESC, waterproof), assembles a new battery iD-Equipped 7-cell Power Cell NiMH battery and quick charger 4-amp DC.
Here are some new images of body parts, Racing Sweep STC-6 for 190 mm touring car. The body has an improved aerodynamics with rear reinforced to give greater rigidity and eliminating body Flex at high speeds without sacrificing stability and cornering speed(flight controller). The STC-6 is suitable for asphalt and carpet paths and is available in three widths: normal 0.8 mm, 0.65 mm lightweight and super light 0.5 mm.
The Robbe presented a new model of Nano series Racer replica of the WWII fighter ME 163 Kraftei. The structure of the plane is made of material expand with carbon fiber spars to give rigidity to the wing. The plane is sold in ARF (Almost Ready to Fly) assembled and equipped by 2260Kv brushless motor, speed controller HobbyWing Skywalker from 40 Amp battery packs compatible 3S or 4S and two servos for rudder commands.
Access to the electronic part(speed controller) is located under the hood held firm on the fuselage using two magnets. To start flying you'll need a transmitter and receiver with a minimum of 4 channels (the recommended Robbe Futaba T6J with R2006GS receiver) and batteries. The dwarf Racer ME 163 Kraftei is available in red colour and camouflage.
On 30 and 31 May to Lido Di Camaiore Lucca province will host the race quadricotteri race FPV SMASH DOWN 2015. The event is organized by the staff of MyModelMarket and is sponsored by Horizon Hobby(hobby store), FatShark and GoPro. The race will take place on the beach in a path with sliding steps, narrow turns and obstacles to avoid. The competition involves a limited number of 50 pilots and is giving away a prize of 1,000 euros for the winner.
In a video of the new racing quad Blade Mach 25 250 class where you can get an idea of this type of racing, while at the bottom you will find contacts for register.
On Saturday you can attend airshows and try these quadricotteri, with beach party at the end of the day, while Sunday will run the race.
At Safalero are finally available in stock the racing buggy DEX8 (brushless) and DNX8 with internal combustion engine. Everything in DNX8(hobby shop) is new, innovative and designed to Excel in competitions of any level with optimised geometries, refined settings, high quality materials and design thought to optimize and speed up maintenance so as to concentrate the most on the runway.
Yesterday at the circuit the spark in Contigliano (RI) was held the second regional championship 1/8 AMSCI CHAMPION Lazio gt. As the first, the second regional championship test saw the participation of a large group of fans to show driving skills at one of the best circuits in Lazio. The beautiful sunny day did frame(flame wheel ) a morning dedicated to free practice and qualifying and batteries in the afternoon took the semi-finals and finals. Down the charts of categories F1, F2 and Expert.
Contextually to pilots from reward for today's competition were awarded the winners of the last edition. The Regional Director thanked everyone for participating, and remember that the next appointment is for 24 May 2015 – 3rd proof of C.R. Lazio GT track at Terracina (LT)
This the final podium for class F2
1. Alessandro Di Stefano
2. Mirko Vespa
3. Denny Colucci
This the final podium for the F1 category
1. Diego Ferrante
2. Henry Crescenzi
3. Stefano Bucci
The Expert final and went to Italian champion Roberto Catanzani neo
This Expert's podium
1. Roberto Catanzani
2. Roberto Springs
3. Lorenzo Happy
The 21 year old Kyle Branson is participating in round 3 of the ETS with his Capricorn TE03 after renewed the contract with Capricorn. Regarding his car the driver calls it a that is easy to make changes. His other sponsors are Gravity, More Speed and PROTOform. As well as many other drivers, including Kyle defines the track dedicated to SIC apparently easy, though in reality because of his numerous leaps one must be very careful! If you are not focused in good measure the acceleration, especially before the straight, you may even take off the machine!
Of course for the young Kyle isn't the first race in Italy. His favourite track is Gubbio, however defines the Riccione "very nice". He began his career at only eight years ... now I'm about 13 years then squeezes his thumbs on the remote control. When he's not busy on a driving stage(hobby shops online), Kyle goes fishing or working with his father.
Loves Italian food, but the biggest advantage of Italy says is the weather: Sun and sky, far rarer in Britain! In the first trial today his best times were: 16,720, 16,844, 16,925.
During the tests was 27 group, but in the best lap was done by Coelho at 16,507. After practice they came skill groups and Kyle is located in 25 Group 2; next to him, Alexei Menicucci, currently best Italian performance.
At the Electronic Dreams is available the new electric monster truck Team Magic E6 III HX 1/8 scale. The model comes ready to run with 2.4 GHz radio control H.A.R.D., LED lights system, wheelie bar rear, the new brushless motor plus THOR from 42 mm High Torque 2500KV(DJI INNOVATIONS), speed regulator from 100 Amps LiPo battery packs compatible 4S and Heavy Duty waterproof Savöx servo. In the video below you can see this truck in action to get an idea of the performance.
E6 evolution model Trooper 2 besides a new electronics, bodywork and rear wing has new steel transmission, differential, larger bumpers, side body guards and new wheels and larger tires.
Last weekend we had the first round of the Italian Championship 1/10 Touring nitro 2015 which saw the triumph of Francesco Tironi behind the remote control of his motor XRD Sheperd(brushless motor). Here is the official report of the Amsci Champion:
Initially a weekend marked by bad weather and went beautifully, the earliest evidence of Italian Championship 1/10 Nitro in Gubbio. 76 pilots are given in three categories, and thanks to the always wonderful organizers of Club Automodellistico 5 packages they could do it in the best possible environment. At the end of the 45-minute final in Expert category was Francis Tam to take home a deserved victory having started from the tile number 1, followed by little more than a ride by Luke Redaelli and two laps by Maheswari. The author of the superpole Dario Balestri ends at the foot of the podium.
As in the higher category, even in F1 pole author Dante Piersante managed to turn an opportunity to start in front of everyone at a final victory by pulling two laps Balboni, while the podium was completed by Perniciaro.
